banner_page

LMK04000BISQE/NOPB

3.3V Clock Conditioner 1.296GHz LMK04000 Clock Generators 48 Pins 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMK04000BISQE/NOPB
  • Package: 48-WFQFN Exposed Pad
  • Datasheet: -
  • Stock: 151
  • Description: 3.3V Clock Conditioner 1.296GHz LMK04000 Clock Generators 48 Pins 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-WFQFN Exposed Pad
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
ECCN Code EAR99
Type Clock Conditioner
Terminal Finish Matte Tin (Sn)
Subcategory Clock Drivers
Packing Method TR
Technology BICMOS
Voltage - Supply 3.15V~3.45V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 1.2GHz
Base Part Number LMK04000
Output LVCMOS, 2VPECL, LVPECL
Pin Count 48
Number of Outputs 7
Supply Voltage-Max (Vsup) 3.45V
Power Supplies 3.3V
Number of Circuits 1
Nominal Supply Current 380mA
Frequency (Max) 1.296GHz
Number of Inputs 2
Input LVCMOS, LVDS, LVPECL
Ratio - Input:Output 2:7
Max I(ol) 0.0005 A
PLL Yes
Differential - Input:Output Yes/Yes
Height 800μm
Length 7mm
Width 7mm
Thickness 750μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMK04000BISQE/NOPB Overview


As a clock IC, it uses the Tape & Reel (TR) package. As part of the 48-WFQFN Exposed Pad package, this clock generator is embedded. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As a result, frequency synthesizers can be found to contain 48 terminations. The supply voltage of 3.3V allows for high efficiency. A clock generator's input is called LVCMOS, LVDS, LVPECL and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. The frequency generator has a maximum frequency of 1.296GHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Approximately 3.45V is the maximum supply voltage needed by this time clock generator. There should be 3.15V~3.45V provided with this RF synthesizer. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. The RF synthesizer is compatible with LVCMOS, 2VPECL, LVPECL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Conditioner component. Clock PLL is equipped with 48 pin count. This part number LMK04000 is related to the following electrical components. There is an available 48 pin on the PLL. As a result, it is commonly classified as a type of Clock Drivers clock PLL. 7 signal outputs are provided for enhancing output frequency as much as possible. It is able to realize high efficiency when operating at a frequency of 1.2GHz. This electronic frequency generator is well suited to the TR package. 2 inputs are employed.

LMK04000BISQE/NOPB Features


Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V

LMK04000BISQE/NOPB Applications


There are a lot of Texas Instruments LMK04000BISQE/NOPB Clock Generators applications.

  • Vector network analyzers (VNA)
  • Coherent detection of the signal
  • Satellite receivers
  • FPGA and processor clocks
  • Microwave radio
  • Automatic test equipment
  • Mobile telephones
  • Clock recovery
  • GPS systems
  • Ultrasound diagnosis

Write a review

Note: HTML is not translated!
    Bad           Good