LMK04001BISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Conditioner |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.5GHz |
| Base Part Number | LMK04001 |
| Output | LVCMOS, 2VPECL, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 7 |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 380mA |
| Frequency (Max) | 1.57GHz |
| Number of Inputs | 2 |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 2:7 |
| Max I(ol) | 0.0005 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK04001BISQE/NOPB Overview
Clock ICs are packaged using the Tape & Reel (TR) method. The 48-WFQFN Exposed Pad package embeds this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 48 terminations can be found in frequency generators. This clock generator ic should receive a voltage of 3.3V. In this clock generator, LVCMOS, LVDS, LVPECL is used as the input to the clock. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 1.57GHz is available. Surface Mount-slots make it easy to mount this electronic component on panels. It would be possible to supply this clock PLL with 3.45V of power. Clock PLL works with 3.15V~3.45V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS, 2VPECL, LVPECL logic levels. This is an electronic part that can be classified as a Clock Conditioner in this case. In particular, this clock PLL is designed to be used with microprocessors. This part number LMK04001 is related to the following electrical components. It is possible to connect to the PLL via 48 pins. In general, this clock PLL is considered a Clock Drivers device. The frequency synthesizer features 7 signal outputs to ensure as high a frequency as possible. Using a frequency of 1.5GHz allows frequency synthesizer to achieve high efficiencies. A clock generator ic such as this would be well suited to the TR package. The time clock generator uses 2 inputs.
LMK04001BISQE/NOPB Features
Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
LMK04001BISQE/NOPB Applications
There are a lot of Texas Instruments LMK04001BISQE/NOPB Clock Generators applications.
- CPUs
- GPS systems
- Signal generator
- MRI
- Quenching?
- Automatic control system test
- Signal demodulation
- Frequency synthesis
- Closed circuit systems
- Multi-function printers
