LMK04033BISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Conditioner |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2GHz |
| Base Part Number | LMK04033 |
| Output | LVCMOS, LVDS, 2VPECL, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 6 |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Operating Supply Current | 335mA |
| Nominal Supply Current | 335mA |
| Frequency (Max) | 2.16GHz |
| Number of Inputs | 2 |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 2:6 |
| Max I(ol) | 0.0005 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK04033BISQE/NOPB Overview
Tape & Reel (TR)-method packaging is used for clock ICs. There is a clock generator embedded in the 48-WFQFN Exposed Pad package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. It contains a total of 48 terminations within RF synthesizer. Clock generator ics require a voltage of 3.3V. This Clock PLL will be fed by LVCMOS, LVDS, LVPECL as its input. 1 circuits are implemented to access the electronic component's full performance. An upper frequency limit of 2.16GHz Max can be achieved with this clock-based frequency synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. It would take a maximum supply voltage of 3.45V to operate this time clock generator. In terms of supply voltage, RF synthesizer works with 3.15V~3.45V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The RF synthesizer is compatible with LVCMOS, LVDS, 2VPECL, LVPECL logic levels. This electronic component can be classified into Clock Conditioner. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. LMK04033 is the base part number for finding related electronic parts. PLL is designed with 48 pins. Fundamentally, this is a kind of Clock Drivers clock PLL. Clock PLL has 6 signal outputs to maximi6e output frequency. By operating at a frequency of 2GHz, frequency generator is able to achieve high efficiency. For the RF synthesizer to function properly, a supply current of 335mA must be provided. Ideally, this electronic frequency generator fits the TR package. On this time clock generator, there are 2 inputs.
LMK04033BISQE/NOPB Features
Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
LMK04033BISQE/NOPB Applications
There are a lot of Texas Instruments LMK04033BISQE/NOPB Clock Generators applications.
- Automatic test equipment
- Radio receivers
- Signal demodulation
- Main oscillator in receiver
- High-speed communication applications
- Automatic control system test
- Wireless handsets
- Notebooks
- Mechanical devices
- Telecommunication systems
