LMK04906BISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-WFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | PLLatinum™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Drivers |
| Packing Method | TR |
| Max Power Dissipation | 100μW |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 500MHz |
| Base Part Number | LMK04906 |
| Output | LVCMOS, LVDS, LVPECL |
| Pin Count | 64 |
| Number of Outputs | 6 |
| Number of Circuits | 1 |
| Load Capacitance | 5pF |
| Nominal Supply Current | 410mA |
| Frequency (Max) | 2.6GHz |
| Number of Inputs | 3 |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 3:6 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| Max I(ol) | 0.0005 A |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Height | 800μm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 0m |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK04906BISQE/NOPB Overview
The Cut Tape (CT) method is used for packaging clock ICs. The 64-WFQFN Exposed Pad package contains this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 64 terminations. The supply voltage of 3.3V allows for high efficiency. LVCMOS, LVDS, LVPECL is designed as this clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. The frequency generator has a maximum frequency of 2.6GHz. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock generators should operate with the voltage supply of 3.15V~3.45V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. There are several logic levels in LVCMOS, LVDS, LVPECL logic that can be used with this clock generator. The clock-generating IC is a 64-bit device designed specifically for microprocessors. LMK04906 is the base part number for finding related electronic parts. There is an available 64 pin on the PLL. And basically, this clock generator is often classified as a kind of Clock Drivers. An electronic part belonging to the PLLatinum? series is being used here. The output frequency is magnified as high as possible with 6 signal outputs. The logic IC PLL clock adopts is PLL BASED CLOCK DRIVER. By operating at a frequency of 500MHz, RF synthesizer is able to reali500MHze high efficiency. In this case, we are referring to the load capacitance which is 5pF. The TR package suits this RF synthesizer ideally. There are 3 inputs on this clock generator.
LMK04906BISQE/NOPB Features
Available in the 64-WFQFN Exposed Pad
Supply voltage of 3.3V
Load capacitance of 5pF
LMK04906BISQE/NOPB Applications
There are a lot of Texas Instruments LMK04906BISQE/NOPB Clock Generators applications.
- Radiotelephones
- Signal modulation and demodulation
- FM demodulation networks for FM operations
- Picocells, femtocells and small cells
- Remote telemetry and instrumentation
- Symbol synchronization
- Electronic equipment
- Digital circuits
- Digital switching systems
- Carrier synchronization in wired communication
