LMP2012MA/NOPB

2 Channels 17mA per Channel 3pA 100 dB Instrumentational OP Amps 0.000004μA 2.7V~5.25V LMP2012 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMP2012MA/NOPB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 344
Description: 2 Channels 17mA per Channel 3pA 100 dB Instrumentational OP Amps 0.000004μA 2.7V~5.25V LMP2012 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	LMP®
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	LMP2012
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	930μA
Nominal Supply Current	930μA
Output Current	18mA
Max Supply Current	2.4mA
Slew Rate	4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	2.7V~5.25V
Output Current per Channel	17mA
Input Offset Voltage (Vos)	36μV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	105dB
Average Bias Current-Max (IIB)	0.000004μA
Power Supply Rejection Ratio (PSRR)	95dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	0.12μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMP2012MA/NOPB Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 36μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 930μA , this buffer op amp will be able to operate. The voltage gain should stay at 105dB. The op amp ic has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. In this case, LMP? represents the instrumentation amplifiers' series number.