LMP2012MM

2 Channels 17mA per Channel 3pA 100 dB Instrumentational OP Amps 2.7V~5.25V LMP2012 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMP2012MM
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 935
Description: 2 Channels 17mA per Channel 3pA 100 dB Instrumentational OP Amps 2.7V~5.25V LMP2012 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	LMP®
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LMP2012
Pin Count	8
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	930μA
Nominal Supply Current	930μA
Output Current	18mA
Slew Rate	4V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	3pA
Voltage - Supply, Single/Dual (±)	2.7V~5.25V
Output Current per Channel	17mA
Input Offset Voltage (Vos)	36μV
Bandwidth	3MHz
Unity Gain BW-Nom	3000 kHz
Voltage Gain	105dB
Power Supply Rejection Ratio (PSRR)	95dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	0.12μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Height Seated (Max)	1.09mm
Length	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LMP2012MM Overview

In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 36μV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 930μA . There should be no change in the voltage gain at 105dB. As far as the device is concerned, buffer amplifier has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Buffer op amp series numbers are indicated by the LMP?.