LMP2021MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMP2021 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 50mA |
| Slew Rate | 2.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 160dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.4μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.0002μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2021MF/NOPB Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Buffer amps of this type are called Zero-Drift-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 5. A total of 5 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 2.5V. It should be noted that this op amp is a type of Operational Amplifier device. An 5-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 5μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1.1mA can be used to operate this linear amplifier. 160dB should be the voltage gain. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. As a result of this, the buffer amplifier is packed in TR. In this case, LMP? represents the instrumentation amplifiers' series number.
LMP2021MF/NOPB Features
5 Pins
supply voltage of 2.5V
160dB voltage gain
LMP2021MF/NOPB Applications
There are a lot of Texas Instruments LMP2021MF/NOPB Instrumentational OP Amps applications.
- Tablets
- Multimedia playback equipment
- Scintillation detectors
- Laptop
- Radar
- Car stereo
- Blood pressure sensors
- RF cable systems
- Division circuits
- Integrator circuits
