LMP2021MFX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMP2021 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 50mA |
| Slew Rate | 2.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 160dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 0.4μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.0002μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2021MFX/NOPB Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. Zero-Drift-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. There is a growing number of terminations approaching the number of 5. Buffer amplifier has a total of 5 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 5-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 5μV. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.1mA . 160dB should remain the voltage gain. There are 1 elements in this buffer amplifier. It is used TR to pack the op amps. LMP? corresponds to linear amplifier's series.
LMP2021MFX/NOPB Features
5 Pins
supply voltage of 2.5V
160dB voltage gain
LMP2021MFX/NOPB Applications
There are a lot of Texas Instruments LMP2021MFX/NOPB Instrumentational OP Amps applications.
- Medical instruments
- Communication
- Industrial control system
- Proportional operation circuits
- Division circuits
- PDA
- Multiplication circuits
- Home audio systems
- Communication device
- Hand-held batteries
