LMP2231AMF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LMP2231 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 10μA |
| Output Current | 30mA |
| Slew Rate | 0.058V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 130 kHz |
| Unity Gain BW-Nom | 130 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2231AMF/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. A Tape & Reel (TR) case is used for delivering the op amp. A total of 5 terminations have been reported in the past few weeks. It consists of a total of 5 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 5 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 10μA . It is a member of the 120dB's 120dB family. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in total in this linear amplifier. This linear amplifier pack is based on the TR axis. Buffer op amp series numbers are indicated by the LMP?, PowerWise?.
LMP2231AMF/NOPB Features
5 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LMP2231AMF/NOPB Applications
There are a lot of Texas Instruments LMP2231AMF/NOPB Instrumentational OP Amps applications.
- Band-stop filter
- Video conversion and routing
- Subtraction operation circuits
- Fission chambers
- Switching amplifier
- Commercial audio systems
- Vehicle electronics
- Information processing
- Active probe
- Hand-held batteries
