LMP2232AMME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMP2232 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 19μA |
| Nominal Supply Current | 16μA |
| Output Current | 30mA |
| Slew Rate | 0.058V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 130 kHz |
| Unity Gain BW-Nom | 130 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.000001μA |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000003μA |
| Programmable Power | NO |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2232AMME/NOPB Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 1.8V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 150μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 19μA. Voltage gain should remain at 120dB. The op amp ic has 2 channels on it. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A TR-shaped amplifier is used to pack the buffer amps. In this case, LMP?, PowerWise? represents the instrumentation amplifiers' series number.
LMP2232AMME/NOPB Features
8 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LMP2232AMME/NOPB Applications
There are a lot of Texas Instruments LMP2232AMME/NOPB Instrumentational OP Amps applications.
- RF cable systems
- pH (acidity)
- Fission chambers
- High-frequency data acquisition systems
- Micro signal measurement
- Multimedia playback equipment
- Radiation thermometry transducers
- Television broadcasting equipment
- Thermocouples
- Automatic control
