LMP2234AMTE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | LMP2234 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Operating Supply Current | 36μA |
| Nominal Supply Current | 31μA |
| Output Current | 30mA |
| Slew Rate | 0.058V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 130 kHz |
| Unity Gain BW-Nom | 130 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 10μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP2234AMTE/NOPB Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 14 pins. Regarding input offset voltage, buffer amplifier rates 150μV voltage. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 36μA and 10 . There should be no change in the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The total number of elements in this buffer amplifier is 4. A TR-shaped amplifier is used to pack the buffer amps. In this case, LMP?, PowerWise? represents the instrumentation amplifiers' series number.
LMP2234AMTE/NOPB Features
14 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LMP2234AMTE/NOPB Applications
There are a lot of Texas Instruments LMP2234AMTE/NOPB Instrumentational OP Amps applications.
- Polarized electrodes
- Broadcasting
- Power control
- Exponential operation circuits
- Video computer boards
- Wireless base stations
- Commercial audio systems
- Medical imaging
- Differentiator circuits
- PDA
