banner_page

LMP2234BMTE/NOPB

30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 0.00005μA 1.6V~5.5V LMP2234 14 Pins 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP2234BMTE/NOPB
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 141
  • Description: 30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 0.00005μA 1.6V~5.5V LMP2234 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series LMP®, PowerWise®
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 1.8V
Base Part Number LMP2234
Pin Count 14
Output Type Rail-to-Rail
Power Supplies 2/5V
Number of Circuits 4
Operating Supply Current 36μA
Nominal Supply Current 31μA
Output Current 30mA
Slew Rate 0.058V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 81 dB
Current - Input Bias 0.02pA
Voltage - Supply, Single/Dual (±) 1.6V~5.5V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 10μV
Bandwidth 130 kHz
Unity Gain BW-Nom 130 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.00005μA
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000001μA
Programmable Power NO
Power NO
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP2234BMTE/NOPB Overview


A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 10μV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You can run this op amp ic on 36μA . The voltage gain should stay at 120dB. This op amp contains 4 circuits. On the output type, there are Rail-to-Rail different types of op amps. For the packing of the instrumentation amplifier, TR is adopted. Buffer op amp series numbers are indicated by the LMP?, PowerWise?.

LMP2234BMTE/NOPB Features


14 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail

LMP2234BMTE/NOPB Applications


There are a lot of Texas Instruments LMP2234BMTE/NOPB Instrumentational OP Amps applications.

  • Car stereo
  • Signal amplification
  • Oscilloscopes
  • ECG equipment
  • Switching amplifier
  • Signal filtering
  • Large motor controllers
  • Navigation
  • Test and measurement instruments
  • Television

Write a review

Note: HTML is not translated!
    Bad           Good