banner_page

LMP2234BMT/NOPB

30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 0.00005μA 1.6V~5.5V LMP2234 14 Pins 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP2234BMT/NOPB
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 561
  • Description: 30mA per Channel 0.02pA 81 dB Instrumentational OP Amps 0.00005μA 1.6V~5.5V LMP2234 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~125°C
Packaging Tube
Series LMP®, PowerWise®
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 1.8V
Base Part Number LMP2234
Pin Count 14
Output Type Rail-to-Rail
Power Supplies 2/5V
Number of Circuits 4
Operating Supply Current 36μA
Nominal Supply Current 31μA
Output Current 30mA
Slew Rate 0.058V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 81 dB
Current - Input Bias 0.02pA
Voltage - Supply, Single/Dual (±) 1.6V~5.5V
Output Current per Channel 30mA
Input Offset Voltage (Vos) 10μV
Bandwidth 130 kHz
Unity Gain BW-Nom 130 kHz
Voltage Gain 120dB
Average Bias Current-Max (IIB) 0.00005μA
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000001μA
Programmable Power NO
Power NO
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP2234BMT/NOPB Overview


It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 1.8V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 10μV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 36μA . The voltage gain should stay at 120dB. This op amp ic has 4 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. LMP?, PowerWise? is the number that corresponds to the series of the buffer op amp.

LMP2234BMT/NOPB Features


14 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail

LMP2234BMT/NOPB Applications


There are a lot of Texas Instruments LMP2234BMT/NOPB Instrumentational OP Amps applications.

  • Proportional counter tubes
  • Vehicle electronics
  • Tablets
  • Hand-held batteries
  • Video data acquisition
  • Car stereo
  • Power transmission
  • Professional videography
  • pH (acidity)
  • Communication device

Write a review

Note: HTML is not translated!
    Bad           Good