LMP2234BMTX/NOPB
| Parameters | |
|---|---|
| Power Supplies | 2/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 36μA |
| Nominal Supply Current | 31μA |
| Output Current | 30mA |
| Slew Rate | 0.058V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 0.02pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 10μV |
| Gain Bandwidth Product | 130kHz |
| Unity Gain BW-Nom | 130 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | LMP2234 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
LMP2234BMTX/NOPB Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations is approaching the 14 mark. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 1.8V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. Op amp ic rates 10μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using a supply current of 36μA , this buffer op amp will be able to operate. You should keep the voltage gain at 120dB for the time being. On this buffer amplifier, there are 4 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. It is used TR to pack the op amps. LMP?, PowerWise? is the number that corresponds to the series of the buffer op amp.
LMP2234BMTX/NOPB Features
14 Pins
supply voltage of 1.8V
120dB voltage gain
Output Type: Rail-to-Rail
LMP2234BMTX/NOPB Applications
There are a lot of Texas Instruments LMP2234BMTX/NOPB Instrumentational OP Amps applications.
- Instrumentation
- Fast A/D and D/A converters
- E-book readers
- Gaming industry
- Voltage regulation circuit
- Navigation
- Switching amplifier
- Proportional operation circuits
- Signal operation
- Measurements of Wheatstone bridge
