banner_page

LMP7300MA/NOPB

Surface Mount Tube 10mA mA 7700 ns μs Linear Comparators 3nA pA 13μA μA 750μV mV Surface Mount


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP7300MA/NOPB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 570
  • Description: Surface Mount Tube 10mA mA 7700 ns μs Linear Comparators 3nA pA 13μA μA 750μV mV Surface Mount (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tube
Series LMP®, PowerWise®
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Voltage Reference
Terminal Finish Matte Tin (Sn)
Subcategory Comparator
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number LMP7300
Pin Count 8
Output Type CMOS, Open-Collector, TTL
Number of Elements 1
Nominal Supply Current 13μA
Output Current 10mA
Max Supply Current 13μA
Propagation Delay 15 μs
Quiescent Current 13μA
Response Time 7700 ns
Common Mode Rejection Ratio 100 dB
Voltage - Supply, Single/Dual (±) 2.7V~12V ±1.35V~6V
Input Offset Voltage (Vos) 750μV
Average Bias Current-Max (IIB) 0.003μA
Power Supply Rejection Ratio (PSRR) 100dB
Max Input Current 3nA
Input Bias Current 3nA
Voltage - Input Offset (Max) 0.75mV @ 5V
Current - Input Bias (Max) 0.003μA @ 5V
Hysteresis 1mV
CMRR, PSRR (Typ) 100dB CMRR, 100dB PSRR
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP7300MA/NOPB Overview


In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Open-Collector, TTL output type.The chip is packaged with Tube .The device is designed with 8 terminations.Electronic comparator is a part of Comparator family.In terms of type, this is a typical with Voltage Reference comparator.Currently, it consists of only 1 elements.A total of 8 pins are included.A Surface Mount mounting type is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.There are 8 pins on the comparator.If you require more pin-to-pin solutions, search LMP7300 for more options.A quiescent current of 13μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.For normal use of the device, the nominal supply current should be 13μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 13μA .Electronic comparator is possible to input a maximum current of 3nA into the device.This part is from the LMP?, PowerWise? comparator series.

LMP7300MA/NOPB Features


CMOS, Open-Collector, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 13μA

LMP7300MA/NOPB Applications


There are a lot of Texas Instruments LMP7300MA/NOPB linear comparators applications.

  • Alarm and Monitoring Circuits
  • Wireless Base Stations
  • Point of load regulators
  • Handheld Instruments
  • Mobile Communications
  • Industrial
  • Battery management and protection
  • RC Timers
  • General-Purpose, Low-Voltage Applications
  • High-Speed Differential Line Receiver

Write a review

Note: HTML is not translated!
    Bad           Good