LMP7300MME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMP7300 |
| Pin Count | 8 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Propagation Delay | 15 μs |
| Quiescent Current | 13μA |
| Response Time | 7700 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.003μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Input Current | 3nA |
| Input Bias Current | 3nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.003μA @ 5V |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP7300MME/NOPB Overview
To facilitate transportation, it comes packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type CMOS, Open-Collector, TTL output on this device.Ready for shipping in Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.Electronic comparator is possible to classify the chip as with Voltage Reference .Currently, it consists of only 1 elements.There are 8 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 8 pins on the comparator.Alternatively, you may search for LMP7300 to find more pin-to-pin solutions for your specific needs.There is 13μA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.The nominal supply current of the device should be 13μA for normal use.A supply current exceeding 13μA may result in the comparator malfunctioning.There is a maximum current that can be input into the device of 3nA .Comparator electronics comes from the series of LMP?, PowerWise? comparator parts.Packed in TR , this device is for general uses (often in ADC circuits).
LMP7300MME/NOPB Features
CMOS, Open-Collector, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 13μA
LMP7300MME/NOPB Applications
There are a lot of Texas Instruments LMP7300MME/NOPB linear comparators applications.
- Consumer Medical Electronics
- General-Purpose Portable Devices
- Security Detection Systems
- Motor drives
- Portable and Battery-Powered Systems
- Power Supervision
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics
- Lithium ion battery monitoring
- Ultra-Low Power Systems
