LMP7701MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMP7701 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 790μA |
| Nominal Supply Current | 715μA |
| Output Current | 42mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 86mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 2.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2500 kHz |
| Voltage Gain | 130dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Voltage - Input Offset | 37μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP7701MF/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 5 terminations in the next few months. In this case, there are 5 pins on the board. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. It has 5 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing a supply current of 790μA , this buffer op amp will be able to operate. 130dB should be the voltage gain. There are 1 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 9V voltage. An buffer amplifier is packed in a TR-shape according to the design. As the name implies, LMP? refers to the series of the buffer op amp.
LMP7701MF/NOPB Features
5 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
LMP7701MF/NOPB Applications
There are a lot of Texas Instruments LMP7701MF/NOPB Instrumentational OP Amps applications.
- PDA
- Switching amplifier
- E-book readers
- RF cable systems
- Industrial applications including automation
- Cinema or auditorium audio system
- Active probe
- Professional videography
- Signal operation
- High/low-pass filter circuit
