LMP7704MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LMP7704 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-6/2.7/12V |
| Number of Channels | 4 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 2.9mA |
| Output Current | 42mA |
| Max Supply Current | 3.7mA |
| Slew Rate | 1.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 42mA |
| Input Offset Voltage (Vos) | 56μV |
| Bandwidth | 2.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2500 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Voltage - Input Offset | 37μV |
| Current - Output / Channel | 86mA |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP7704MT/NOPB Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 14. A total of 14 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 14 pins on it. In terms of input offset voltage, operational amplifier rates 56μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.2mA and 10 . 130dB should remain the voltage gain. There are a total of 4 channels available on the op amps. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The LMP? stands for the buffer op amp's serial number.
LMP7704MT/NOPB Features
14 Pins
supply voltage of 5V
130dB voltage gain
Output Type: Rail-to-Rail
LMP7704MT/NOPB Applications
There are a lot of Texas Instruments LMP7704MT/NOPB Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Polarized electrodes
- Active probe
- Large motor controllers
- PDA
- Power control
- High gain DC amplifier
- Test equipment
- Portable media players
- Subtraction operation circuits
