banner_page

LMP7717MFE/NOPB

60mA per Channel 0.1pA 85 dB Instrumentational OP Amps 1.8V~5.5V ±0.9V~2.75V LMP7717 5 Pins SC-74A, SOT-753


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP7717MFE/NOPB
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 310
  • Description: 60mA per Channel 0.1pA 85 dB Instrumentational OP Amps 1.8V~5.5V ±0.9V~2.75V LMP7717 5 Pins SC-74A, SOT-753(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series LMP®, PowerWise®
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.5V
Base Part Number LMP7717
Pin Count 5
Output Type Rail-to-Rail
Number of Elements 1
Operating Supply Current 1.15mA
Nominal Supply Current 1.15mA
Output Current 60mA
Slew Rate 35V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 85 dB
Current - Input Bias 0.1pA
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±0.9V~2.75V
Output Current per Channel 60mA
Input Offset Voltage (Vos) 150μV
Gain Bandwidth Product 88MHz
Unity Gain BW-Nom 88000 kHz
Voltage Gain 110dB
Power Supply Rejection Ratio (PSRR) 85dB
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 6V
Voltage - Input Offset 10μV
Low-Bias YES
Micropower NO
Programmable Power NO
Wideband YES
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP7717MFE/NOPB Overview


The linear amplifier is packaged in a SC-74A, SOT-753 case. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 5 terminations over the past year. Buffer amplifier has a total of 5 pins. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 5 pins that make up the linear amplifier. Op amp rates 150μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 1.15mA . Voltage gain should remain at 110dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. The instrumentation amplifier is packed in the form of TR. This buffer amplifier is assigned within the LMP?, PowerWise? series by its manufacturer.

LMP7717MFE/NOPB Features


5 Pins
supply voltage of 2.5V
110dB voltage gain
Output Type: Rail-to-Rail

LMP7717MFE/NOPB Applications


There are a lot of Texas Instruments LMP7717MFE/NOPB Instrumentational OP Amps applications.

  • Computer workstations
  • Inverse/same-phase proportional circuit
  • Proportional counter tubes
  • Comparator
  • Wireless base stations
  • Navigation
  • pH (acidity)
  • Weak signal detection
  • Scintillation detectors
  • Video amplifiers

Write a review

Note: HTML is not translated!
    Bad           Good