LMP8481MM-T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8481 |
| Number of Circuits | 1 |
| Operating Supply Current | 88μA |
| Nominal Supply Current | 88μA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 124 dB |
| Current - Input Bias | 6.3μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~76V |
| Output Current per Channel | 88μA |
| Input Offset Voltage (Vos) | 80μV |
| Bandwidth | 270 kHz |
| Unity Gain BW-Nom | 270 kHz |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 80μV |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 0.27MHz |
| Programmable Power | NO |
| Power | NO |
| Max Junction Temperature (Tj) | 125°C |
| Common Mode Voltage-Max | 76V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8481MM-T/NOPB Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Op amps are Current Sense types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. As a reminder, this buffer op amp should be powered by 16V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. Op amp rates 80μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Using an 88μA supply current, this operational amplifier ics can be operated. This op amp ic has 1 circuits. This linear amplifier pack is based on the TR axis.
LMP8481MM-T/NOPB Features
supply voltage of 16V
LMP8481MM-T/NOPB Applications
There are a lot of Texas Instruments LMP8481MM-T/NOPB Instrumentational OP Amps applications.
- Gaming industry
- Large motor controllers
- Industrial applications including automation
- Signal transformation
- Communication
- Semiconductor detectors
- Exponential operation circuits
- pH (acidity)
- Addition operation circuits
- Differentiator circuits
