Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
LMP® |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
590kOhm |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
LMP8601 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Operating Supply Current |
1.1mA |
Nominal Supply Current |
1.5mA |
Output Current |
42mA |
Slew Rate |
0.83V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Current Sense |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
0.04pA |
Voltage - Supply, Single/Dual (±) |
3V~5.5V |
Output Current per Channel |
48mA |
Input Offset Voltage (Vos) |
150μV |
Bandwidth |
60 kHz |
Unity Gain BW-Nom |
60 kHz |
Voltage Gain |
26.06dB |
Average Bias Current-Max (IIB) |
0.02μA |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Low-Bias |
NO |
Micropower |
NO |
Programmable Power |
NO |
Voltage Gain-Nom |
20 |
Common Mode Voltage-Max |
60V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LMP8601MAX/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.3V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 150μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 1.1mA, this op amp ic can operate. The voltage gain should stay at 26.06dB. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. As a result of this, the buffer amplifier is packed in TR. As the name implies, LMP? refers to the series of the buffer op amp. Linear amplifier resistance should stay within the range of 590kOhm.
LMP8601MAX/NOPB Features
8 Pins
supply voltage of 3.3V
26.06dB voltage gain
Resistance of 590kOhm
LMP8601MAX/NOPB Applications
There are a lot of Texas Instruments LMP8601MAX/NOPB Instrumentational OP Amps applications.
- Automation control systems
- High gain DC amplifier
- Biopotential
- Video data acquisition
- Portable docking station
- Ultrasound transducers
- Video computer boards
- Test equipment
- Radar
- RF cable systems