LMP8601QMAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 590kOhm |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMP8601 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 42mA |
| Slew Rate | 0.83V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 60 kHz |
| Voltage Gain | 26.06dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Voltage Gain-Nom | 20 |
| Common Mode Voltage-Max | 60V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8601QMAX/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Current Sense-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 3.3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 150μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using a supply current of 1.1mA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 26.06dB at all times. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. An buffer amplifier is packed in a TR-shape according to the design. The Automotive, AEC-Q100, LMP? represents the op amp's series number. 590kOhm should be the range of resistance for the instrumentation amplifier.
LMP8601QMAX/NOPB Features
8 Pins
supply voltage of 3.3V
26.06dB voltage gain
Resistance of 590kOhm
LMP8601QMAX/NOPB Applications
There are a lot of Texas Instruments LMP8601QMAX/NOPB Instrumentational OP Amps applications.
- Biopotential
- Voltage regulation circuit
- Switching amplifier
- Broadcasting
- Scintillation detectors
- Video data acquisition
- Thermocouples
- Signal transformation
- Commercial audio systems
- Instrumentation
