LMP8602MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LMP8602 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 42mA |
| Max Supply Current | 1.3mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 60 kHz |
| Unity Gain BW-Nom | 60 kHz |
| Voltage Gain | 34.02dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 150μV |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 60V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8602MA/NOPB Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Current Sense-type instrumentation amplifiers are used in this application. A Tube case is used for delivering the op amp. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Using a supply current of 1.1mA , this buffer op amp will be able to operate. The voltage gain should stay at 34.02dB. 1 channels are available on the instrumentation amplifier. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. In this case, LMP? represents the instrumentation amplifiers' series number.
LMP8602MA/NOPB Features
8 Pins
34.02dB voltage gain
LMP8602MA/NOPB Applications
There are a lot of Texas Instruments LMP8602MA/NOPB Instrumentational OP Amps applications.
- Proportional operation circuits
- Signal amplification
- Radiation thermometry transducers
- Test and measurement instruments
- Communication
- High speed sample
- Vehicle electronics
- Integrator circuits
- E-book readers
- Power transmission
