LMP8602MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMP8602 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 42mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 60kHz |
| Unity Gain BW-Nom | 60 kHz |
| Voltage Gain | 34.02dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage Gain-Nom | 50 |
| Common Mode Voltage-Max | 60V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8602MMX/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. Op amps are Current Sense types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. The pins on this board total to 8 in total. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. 8 pins are included on the operational amplifiers. There is an input offset voltage of 150μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 1.1mA and 10 . 34.02dB should be the voltage gain. The buffer amp consists of 1 circuits in total. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For the packing of the instrumentation amplifier, TR is adopted. LMP? corresponds to the op amp's series.
LMP8602MMX/NOPB Features
8 Pins
34.02dB voltage gain
LMP8602MMX/NOPB Applications
There are a lot of Texas Instruments LMP8602MMX/NOPB Instrumentational OP Amps applications.
- Laptop
- Polarized electrodes
- Large motor controllers
- High/low-pass filter circuit
- Video conversion and routing
- Test and measurement instruments
- High input resistance broadband
- Fission chambers
- Division circuits
- Hand-held batteries
