LMP8603MA/NOPB
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LMP8603 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Output Current | 42mA |
| Max Supply Current | 1.3mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 60 kHz |
| Voltage Gain | 40.04dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 150μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
LMP8603MA/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the Current Sense type. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 1mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . Operational amplifier can operate supply current at 1.1mA. You should keep the voltage gain at 40.04dB for the time being. Buffer op amp is equipped with 1 channels on the device. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The LMP? represents the op amp's series number.
LMP8603MA/NOPB Features
8 Pins
40.04dB voltage gain
LMP8603MA/NOPB Applications
There are a lot of Texas Instruments LMP8603MA/NOPB Instrumentational OP Amps applications.
- Video computer boards
- Large motor controllers
- Digital cameras
- PDA
- Voltage regulation circuit
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Industrial applications including automation
- Weighing systems
- Signal transformation
