LMP8603MME/NOPB
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Base Part Number | LMP8603 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 60kHz |
| Voltage Gain | 40.04dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 150μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
LMP8603MME/NOPB Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case which makes it easy for the consumer to handle. An op amp ic of the Current Sense type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are located on this board. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . An 1.1mA volt supply current is needed for this linear amplifier to operate. Maintain 40.04dB as the voltage gain. In total, there are 1 circuits on this buffer amplifier. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR. Buffer op amp series numbers are indicated by the LMP?.
LMP8603MME/NOPB Features
8 Pins
40.04dB voltage gain
LMP8603MME/NOPB Applications
There are a lot of Texas Instruments LMP8603MME/NOPB Instrumentational OP Amps applications.
- Medical instruments
- Strain gauges
- Commercial audio systems
- earphone
- Television
- Broadcasting
- Power generator
- E-book readers
- Comparator
- Scintillation detectors
