LMP8603QMME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8603 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 10mV |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Output Current | 48mA |
| Accuracy | 0.45 % |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 150μV |
| Bandwidth | 60 kHz |
| Voltage Gain | 40.04dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8603QMME/NOPB Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. There are 8 pins on this chip. Regarding input offset voltage, buffer amplifier rates 150μV voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 1.1mA. It is recommended to keep the voltage gain at 40.04dB at all times. In total, there are 1 circuits on this buffer amplifier. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. TR is adopted to pack the instrumentation amplifier. LMP? corresponds to the op amp's series.
LMP8603QMME/NOPB Features
8 Pins
40.04dB voltage gain
LMP8603QMME/NOPB Applications
There are a lot of Texas Instruments LMP8603QMME/NOPB Instrumentational OP Amps applications.
- Image computer boards
- MP3
- Displayers for aircraft and air transportation control systems
- Active probe
- Integrator circuits
- Industrial control system
- Automotive sensors
- Mobile phone
- High speed sample
- Automation control systems
