LMP8603QMM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMP® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Instrumentation Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8603 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 0.83V/μs |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 60kHz |
| Voltage Gain | 40.04dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Voltage - Input Offset | 150μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8603QMM/NOPB Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Current Sense-type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. A type of Instrumentation Amplifier op amp ic can be identified by the fact that this is a type of Instrumentation Amplifier device. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 1.1mA . Voltage gain should remain at 40.04dB. There are 1 circuits on op amps. A total of 2 elements are present in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is used TR to pack the op amps. Buffer op amp series numbers are indicated by the LMP?.
LMP8603QMM/NOPB Features
8 Pins
40.04dB voltage gain
LMP8603QMM/NOPB Applications
There are a lot of Texas Instruments LMP8603QMM/NOPB Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Comparator
- High/low-pass filter circuit
- Active probe
- Measurements of Wheatstone bridge
- Oscilloscopes
- Video computer boards
- Voltage regulation circuit
- Blood pressure sensors
- Portable docking station
