banner_page

LMP8640HVMK-F/NOPB

13μA 60 dB Instrumentational OP Amps 28μA 2.7V~12V LMP8640 6 Pins SOT-23-6 Thin, TSOT-23-6


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP8640HVMK-F/NOPB
  • Package: SOT-23-6 Thin, TSOT-23-6
  • Datasheet: -
  • Stock: 538
  • Description: 13μA 60 dB Instrumentational OP Amps 28μA 2.7V~12V LMP8640 6 Pins SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6 Thin, TSOT-23-6
Number of Pins 6
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Base Part Number LMP8640
Pin Count 6
Number of Elements 1
Operating Supply Current 2.3mA
Nominal Supply Current 722μA
Slew Rate 1.8V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Current Sense
Common Mode Rejection Ratio 60 dB
Current - Input Bias 13μA
Voltage - Supply, Single/Dual (±) 2.7V~12V
Input Offset Voltage (Vos) 900μV
Gain Bandwidth Product 450kHz
Unity Gain BW-Nom 450 kHz
Voltage Gain 33.98dB
Average Bias Current-Max (IIB) 28μA
Power Supply Rejection Ratio (PSRR) 85dB
Low-Offset YES
Frequency Compensation YES
Low-Bias NO
Micropower YES
Programmable Power NO
Wideband NO
Height 1.1mm
Length 2.9mm
Width 1.6mm
Thickness 870μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP8640HVMK-F/NOPB Overview


There is a SOT-23-6 Thin, TSOT-23-6 case in which the instrumentation amplifier is packaged. An op amp of this type is a Current Sense-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. A total of 6 terminations have been reported in the past few weeks. In this case, there are 6 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 6 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 900μV. Surface Mount is the recommended mounting type for this linear amplifier. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.3mA and 10 . There should be no change in the voltage gain at 33.98dB. The linear amplifier consists of 1 different elements in total. It is used TR to pack the op amps.

LMP8640HVMK-F/NOPB Features


6 Pins
supply voltage of 5V
33.98dB voltage gain

LMP8640HVMK-F/NOPB Applications


There are a lot of Texas Instruments LMP8640HVMK-F/NOPB Instrumentational OP Amps applications.

  • earphone
  • High speed sample
  • Subtraction operation circuits
  • Medical instruments
  • Proportional counter tubes
  • Proportional operation circuits
  • Industrial applications including automation
  • Strain gauges
  • Automation control systems
  • Laptop

Write a review

Note: HTML is not translated!
    Bad           Good