LMP8640HVMK-H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Number of Elements | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 722μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 230kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 40dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640HVMK-H/NOPB Overview
The linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case. The instrumentation amplifier in this picture is of the Current Sense-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 6 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 900μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. A supply current of 2.3mA can be used to operate this linear amplifier. You should keep the voltage gain at 40dB for the time being. A voltage rating of 1 is indicated for the op amp's operating supply voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
LMP8640HVMK-H/NOPB Features
6 Pins
supply voltage of 5V
40dB voltage gain
LMP8640HVMK-H/NOPB Applications
There are a lot of Texas Instruments LMP8640HVMK-H/NOPB Instrumentational OP Amps applications.
- Video data acquisition
- Instrumentation
- Strain gauges
- Wireless base stations
- Weighing systems
- MP3
- High input resistance broadband
- Medical instruments
- Power transmission
- Blood pressure sensors
