LMP8640HVMKE-F/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Number of Channels | 1 |
| Nominal Supply Current | 722μA |
| Max Supply Current | 800μA |
| Current - Supply | 2.3mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 13μA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 450 kHz |
| Unity Gain BW-Nom | 450 kHz |
| Voltage Gain | 33.98dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640HVMKE-F/NOPB Overview
Packaged in a SOT-23-6 Thin, TSOT-23-6 case, the buffer op amp is ready to use. Current Sense-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be 6 terminations in the next few months. Buffer amplifier has a total of 6 pins. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 6 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 900μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. It is recommended to keep the voltage gain at 33.98dB at all times. There are a total of 1 channels available on the op amps. It is used TR to pack the op amps. We recommend that you use this electronic part with an 2.3mA supply in order to get the best performance from it.
LMP8640HVMKE-F/NOPB Features
6 Pins
supply voltage of 5V
33.98dB voltage gain
LMP8640HVMKE-F/NOPB Applications
There are a lot of Texas Instruments LMP8640HVMKE-F/NOPB Instrumentational OP Amps applications.
- Polarized electrodes
- Tablets
- RF cable systems
- Video computer boards
- PDA
- Communication
- Power generator
- Weighing systems
- Active probe
- Measurements of Wheatstone bridge
