banner_page

LMP8640HVMKE-H/NOPB

1 Channels 13μA 103 dB Instrumentational OP Amps 28μA 2.7V~12V LMP8640 6 Pins SOT-23-6 Thin, TSOT-23-6


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMP8640HVMKE-H/NOPB
  • Package: SOT-23-6 Thin, TSOT-23-6
  • Datasheet: -
  • Stock: 596
  • Description: 1 Channels 13μA 103 dB Instrumentational OP Amps 28μA 2.7V~12V LMP8640 6 Pins SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6 Thin, TSOT-23-6
Number of Pins 6
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.95mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number LMP8640
Pin Count 6
Qualification Status Not Qualified
Number of Channels 1
Operating Supply Current 2.3mA
Nominal Supply Current 722μA
Slew Rate 1.8V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Current Sense
Common Mode Rejection Ratio 103 dB
Current - Input Bias 13μA
Max Input Voltage 12V
Voltage - Supply, Single/Dual (±) 2.7V~12V
Input Offset Voltage (Vos) 900μV
Bandwidth 230 kHz
Unity Gain BW-Nom 230 kHz
Voltage Gain 40dB
Average Bias Current-Max (IIB) 28μA
Power Supply Rejection Ratio (PSRR) 85dB
Low-Offset YES
Frequency Compensation YES
Low-Bias NO
Micropower YES
Programmable Power NO
Height 1.1mm
Length 2.9mm
Width 1.6mm
Thickness 870μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMP8640HVMKE-H/NOPB Overview


The linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case. An op amp ic of the Current Sense type. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 6. It consists of a total of 6 pins in total. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 6 pins. In terms of input offset voltage, operational amplifier rates 900μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.3mA and 10 . There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. This linear amplifier pack is based on the TR axis.

LMP8640HVMKE-H/NOPB Features


6 Pins
supply voltage of 5V
40dB voltage gain

LMP8640HVMKE-H/NOPB Applications


There are a lot of Texas Instruments LMP8640HVMKE-H/NOPB Instrumentational OP Amps applications.

  • Micro signal measurement
  • pH (acidity)
  • Automotive sensors
  • Biopotential
  • Portable media players
  • Video computer boards
  • Measurements of Wheatstone bridge
  • Power generator
  • Industrial applications including automation
  • Information processing

Write a review

Note: HTML is not translated!
    Bad           Good