LMP8640HVMKE-T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Number of Channels | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 722μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 13μA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 950 kHz |
| Unity Gain BW-Nom | 950 kHz |
| Voltage Gain | 26.02dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640HVMKE-T/NOPB Overview
There is a SOT-23-6 Thin, TSOT-23-6 case package that contains the instrumentation amplifiers. This is a Current Sense type op amp. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. A total of 6 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 6. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 6 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 900μV. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 2.3mA . Voltage gain should remain at 26.02dB. As far as the device is concerned, buffer amplifier has 1 channels. An buffer amplifier is packed in a TR-shape according to the design.
LMP8640HVMKE-T/NOPB Features
6 Pins
supply voltage of 5V
26.02dB voltage gain
LMP8640HVMKE-T/NOPB Applications
There are a lot of Texas Instruments LMP8640HVMKE-T/NOPB Instrumentational OP Amps applications.
- Scintillation detectors
- Test and measurement instruments
- Weak signal detection
- Logarithmic operation circuits
- Ultrasound transducers
- Commercial audio systems
- Television broadcasting equipment
- Video computer boards
- Industrial applications including automation
- Portable electronic products powered by batteries
