LMP8640MK-F/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Number of Elements | 1 |
| Nominal Supply Current | 722μA |
| Current - Supply | 2.3mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 13μA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 450kHz |
| Unity Gain BW-Nom | 450 kHz |
| Voltage Gain | 33.98dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MK-F/NOPB Overview
A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. A Current Sense-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 6. The pins on this board total to 6 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 6 pins are available on the instrumentation amplifier. Regarding input offset voltage, op amp rates 900μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . 33.98dB should remain the voltage gain. The op amp is rated for an operating supply voltage of 1. The linear amplifier is packaged by using a TR axis. There is a recommendation that this electrical part be used with a supply with 2.3mA current rating.
LMP8640MK-F/NOPB Features
6 Pins
supply voltage of 5V
33.98dB voltage gain
LMP8640MK-F/NOPB Applications
There are a lot of Texas Instruments LMP8640MK-F/NOPB Instrumentational OP Amps applications.
- Signal amplification
- Large motor controllers
- High/low-pass filter circuit
- Wireless base stations
- Laptop
- High speed sample
- Instrumentation
- Precision measurement
- Video conversion and routing
- Mobile phone
