LMP8640MK-H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Output Voltage | 2.65V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 722μA |
| Supply Current-Max | 0.722mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 230kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 40dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MK-H/NOPB Overview
The linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Current Sense-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 6 terminations over the past year. It consists of a total of 6 pins in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 6 pins. Op amp ic rates 900μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 722μA, this op amp ic can operate. There should be no change in the voltage gain. In total, there are 1 circuits on this buffer amplifier. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. TR is adopted to pack the instrumentation amplifier.
LMP8640MK-H/NOPB Features
6 Pins
supply voltage of 5V
40dB voltage gain
LMP8640MK-H/NOPB Applications
There are a lot of Texas Instruments LMP8640MK-H/NOPB Instrumentational OP Amps applications.
- Multimedia playback equipment
- Video amplifiers
- Subtraction operation circuits
- Fission chambers
- Video conversion and routing
- Home audio systems
- Precision measurement
- Test and measurement instruments
- E-book readers
- Thermocouples
