LMP8640MKE-H/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 36.003894mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Number of Channels | 1 |
| Operating Supply Current | 722μA |
| Max Supply Current | 2.75mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 230 kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 40dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MKE-H/NOPB Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. Op amps are Current Sense types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 6 mark. Linear amplifier has a total of 6 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. Linear amplifier includes 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 900μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 722μA. Voltage gain should remain at 40dB. Op amp ic has 1 channels. TR is adopted to pack the instrumentation amplifier.
LMP8640MKE-H/NOPB Features
6 Pins
supply voltage of 5V
40dB voltage gain
LMP8640MKE-H/NOPB Applications
There are a lot of Texas Instruments LMP8640MKE-H/NOPB Instrumentational OP Amps applications.
- Industrial applications including automation
- Semiconductor detectors
- Integrator circuits
- ECG equipment
- Medical instruments
- High gain DC amplifier
- Information processing
- Weak signal detection
- Video amplifiers
- Voltage regulation circuit
