LMP8640MKE-T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Nominal Supply Current | 722μA |
| Max Supply Current | 2.75mA |
| Current - Supply | 2.3mA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 103 dB |
| Current - Input Bias | 13μA |
| Max Input Voltage | 12V |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 950 kHz |
| Unity Gain BW-Nom | 950 kHz |
| Voltage Gain | 26.02dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MKE-T/NOPB Overview
A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. This is a Current Sense type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 6. Linear amplifier has a total of 6 pins. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 6 pins are available on the instrumentation amplifier. Op amp rates 900μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. 26.02dB should be the voltage gain. There are 1 channels on the operational amplifiers. An buffer amplifier is packed in a TR-shape according to the design. We recommend that you use this electronic part with an 2.3mA supply in order to get the best performance from it.
LMP8640MKE-T/NOPB Features
6 Pins
supply voltage of 5V
26.02dB voltage gain
LMP8640MKE-T/NOPB Applications
There are a lot of Texas Instruments LMP8640MKE-T/NOPB Instrumentational OP Amps applications.
- Hand-held batteries
- Semiconductor detectors
- Video conversion and routing
- Home audio systems
- Addition operation circuits
- Medical imaging
- Oscilloscopes
- Broadcasting
- Signal amplification
- Video data acquisition
