LMP8640MKX-F/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 722μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 450kHz |
| Unity Gain BW-Nom | 450 kHz |
| Voltage Gain | 33.98dB |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MKX-F/NOPB Overview
The linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case which makes it easy for the consumer to handle. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 6. A total of 6 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. It has 6 pins that make up the linear amplifier. Op amp rates 900μV as input offset voltage. This electrical part should be mounted using type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 2.3mA. The voltage gain should stay at 33.98dB. There are a total of 1 elements in this linear amplifier. TR is adopted to pack the instrumentation amplifier.
LMP8640MKX-F/NOPB Features
6 Pins
supply voltage of 5V
33.98dB voltage gain
LMP8640MKX-F/NOPB Applications
There are a lot of Texas Instruments LMP8640MKX-F/NOPB Instrumentational OP Amps applications.
- Mobile phone
- Micro signal measurement
- Thermocouples
- Portable electronic products powered by batteries
- Portable docking station
- Industrial control system
- Radar
- Multimedia playback equipment
- Portable media players
- Instrumentation
