LMP8640MKX-T/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8640 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 722μA |
| Slew Rate | 1.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Input Offset Voltage (Vos) | 900μV |
| Gain Bandwidth Product | 950kHz |
| Unity Gain BW-Nom | 950 kHz |
| Average Bias Current-Max (IIB) | 28μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Common Mode Voltage-Max | 42V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8640MKX-T/NOPB Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. Op amps are Current Sense types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 6. In this case, there are 6 pins on the board. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 6 pins on it. Op amp rates 900μV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . This op amp can operate from a supply current at 2.3mA. This op amp ic has 1 circuits. For the packing of the instrumentation amplifier, TR is adopted.
LMP8640MKX-T/NOPB Features
6 Pins
supply voltage of 5V
LMP8640MKX-T/NOPB Applications
There are a lot of Texas Instruments LMP8640MKX-T/NOPB Instrumentational OP Amps applications.
- Biopotential
- Digital cameras
- Fast A/D and D/A converters
- Non-polarized electrodes
- Scintillation detectors
- Multiplication circuits
- PDA
- Broadcasting
- Video data acquisition
- Oscilloscopes
