LMP8645HVMK/NOPB
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMP8645 |
| Pin Count | 6 |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.8mA |
| Max Supply Current | 2.8mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 260 kHz |
| Unity Gain BW-Nom | 990 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 860kHz |
| Programmable Power | NO |
| Wideband | NO |
| Voltage Gain-Min | 1 |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
LMP8645HVMK/NOPB Overview
There is a SOT-23-6 Thin, TSOT-23-6 case in which the instrumentation amplifier is packaged. An op amp ic of the Current Sense type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 6 terminations. A total of 6 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 6 pins. There is an input offset voltage of 1mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.2mA and 10 . During the manufacturing process, this buffer amplifier is divided into 1 circuits. There are a total of 2 elements in this linear amplifier. It is used TR to pack the op amps. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1.
LMP8645HVMK/NOPB Features
6 Pins
supply voltage of 5V
LMP8645HVMK/NOPB Applications
There are a lot of Texas Instruments LMP8645HVMK/NOPB Instrumentational OP Amps applications.
- Automation control systems
- RF cable systems
- Portable media players
- Radiation thermometry transducers
- Large motor controllers
- Signal amplification
- Precision measurement
- Weighing systems
- Weak signal detection
- Video conversion and routing
