LMP8645MKE/NOPB
| Parameters | |
|---|---|
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.2mA |
| Max Supply Current | 710μA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 5mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 990 kHz |
| Gain Bandwidth Product | 260 kHz |
| Unity Gain BW-Nom | 990 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 860kHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Voltage Gain-Min | 1 |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8645 |
| Pin Count | 6 |
LMP8645MKE/NOPB Overview
Packaged in a SOT-23-6 Thin, TSOT-23-6 case, the buffer op amp is ready to use. Current Sense-type instrumentation amplifiers are used in this application. In the case of Digi-Reel? cases, linear amplifier will be delivered. The number of terminations approaches 6. A total of 6 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 6 pins on it. There is an input offset voltage of 1mV for this buffer op amp. For this electronic part, it is recommended that you mount it with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. This op amp can operate from a supply current at 2.2mA. Instrumentation amplifier has 1 channels on it. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 9V voltage. As a result of this, the buffer amplifier is packed in TR. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1.
LMP8645MKE/NOPB Features
6 Pins
supply voltage of 5V
LMP8645MKE/NOPB Applications
There are a lot of Texas Instruments LMP8645MKE/NOPB Instrumentational OP Amps applications.
- High gain DC amplifier
- Multiplication circuits
- Video data acquisition
- Navigation
- Communication device
- Polarized electrodes
- ECG equipment
- Exponential operation circuits
- Broadcasting
- Portable media players
