LMP8645MK/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8645 |
| Pin Count | 6 |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 610μA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 260 kHz |
| Unity Gain BW-Nom | 990 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 860kHz |
| Programmable Power | NO |
| Wideband | NO |
| Voltage Gain-Min | 1 |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8645MK/NOPB Overview
The linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case. Op amps are Current Sense types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 6 terminations in the next few months. A total of 6 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 6 pins that make up the linear amplifier. Regarding input offset voltage, buffer amplifier rates 1mV voltage. This electronic part is recommended for mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . This op amp can operate from a supply current at 2.2mA. On this instrumentation amplifier, there are 1 circuits that are connected together. For the operating supply voltage of the op amp ic, there is a rating of 2. The operating supply voltage of instrumentation amplifier is rated 9V voltage. TR is adopted to pack the instrumentation amplifier. There is a minimum voltage gain of 1 that this buffer op amp is capable of conducting.
LMP8645MK/NOPB Features
6 Pins
supply voltage of 5V
LMP8645MK/NOPB Applications
There are a lot of Texas Instruments LMP8645MK/NOPB Instrumentational OP Amps applications.
- Division circuits
- Communication
- Broadcasting
- Navigation
- Video conversion and routing
- Power transmission
- Measurements of Wheatstone bridge
- MP3
- Digital cameras
- Radar
