LMP8645MKX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMP8645 |
| Pin Count | 6 |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 610μA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 1.7mV |
| Gain Bandwidth Product | 260 kHz |
| Unity Gain BW-Nom | 990 kHz |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 860kHz |
| Programmable Power | NO |
| Wideband | NO |
| Voltage Gain-Min | 1 |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMP8645MKX/NOPB Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. An op amp ic of the Current Sense type. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 6. The pins on this board total to 6 in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 6 pins that make up the linear amplifier. Op amp ic rates 1.7mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 2.2mA . There are 1 circuits on op amps. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 9V voltage. An buffer amplifier is packed in a TR-shape according to the design. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
LMP8645MKX/NOPB Features
6 Pins
supply voltage of 5V
LMP8645MKX/NOPB Applications
There are a lot of Texas Instruments LMP8645MKX/NOPB Instrumentational OP Amps applications.
- Medical instruments
- Division circuits
- High speed sample
- Fast A/D and D/A converters
- Scintillation detectors
- Blood pressure sensors
- Gaming industry
- Power generator
- MP3
- Signal filtering
