LMS4684ITL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFBGA |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMS4684 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 3V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 5nA |
| Nominal Supply Current | 5nA |
| Turn On Delay Time | 60 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.000005mA |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 800mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 60ns, 40ns |
| Charge Injection | 200pC |
| Channel-to-Channel Matching (ΔRon) | 1.11m Ω |
| Crosstalk | -72dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Drain to Source Resistance | 800mOhm |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMS4684ITL/NOPB Overview
Shipping overseas is convenient with the electronic component packed in 12-WFBGA. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. The total number of terminations is 12. A 2 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. On the other hand, analog switches can be constructed using SPDT switching circuits. If you are looking for variants of the digital switch, trying search with LMS4684. An switch multiplexer with 500mOhm internal resistance has a value of 500mOhm. Datasheets for functions of 12 pins are available. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.8V. The switch device would be able to operate with 5nA current. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. The electrical part can be operated at 5V voltage levels. The electrical component supports 2 inputs. This electronic component presents a Drain to Source resistance of 800mOhm. The analog switch ics includes 4 outputs.
LMS4684ITL/NOPB Features
2 Channels
Switch Circuit: SPDT
5nA Supply Current
Drain-to-Source resistance: 800mOhm
LMS4684ITL/NOPB Applications
There are a lot of Texas Instruments LMS4684ITL/NOPB Analog Switches & Multiplexers ICs applications.
- Optical Applications
- Frame Relay Equipment
- Automotive applications
- RGB switches
- Cable Modem
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- PCMCIA cards
- Isolation
- FTTH
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
