LMV118MF
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMV118 |
| Pin Count | 6 |
| Output Type | Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 600μA |
| Output Current | 20mA |
| Slew Rate | 35V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 400nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 45MHz |
| Gain Bandwidth Product | 45MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 85dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.02mm |
| Length | 2.92mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMV118MF Overview
There is a SOT-23-6 case package that contains the instrumentation amplifiers. Buffer amps of this type are called Voltage Feedback-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 6 terminations over the past year. It consists of a total of 6 pins in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 6 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 600μA . There should be no change in the voltage gain. One of its many advantages is that buffer op amp outputs Push-Pull, Rail-to-Rail signals. There is a rating of 1 for the operating supply voltage of the buffer op amp. The linear amplifier is packaged by using a TAPE AND REEL axis.
LMV118MF Features
6 Pins
supply voltage of 5V
85dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
LMV118MF Applications
There are a lot of Texas Instruments LMV118MF Instrumentational OP Amps applications.
- Navigation
- Signal transformation
- Power generator
- Proportional counter tubes
- Professional videography
- Car stereo
- Scintillation detectors
- Broadcasting
- Test equipment
- Weak signal detection
