LMV2011MF/NOPB
| Parameters | |
|---|---|
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 132dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 0.12μV |
| Current - Output / Channel | 17mA |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMV2011 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 930μA |
| Output Current | 15mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.25V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 3MHz |
LMV2011MF/NOPB Overview
Op amp is packaged in SC-74A, SOT-753 case. Buffer amps of this type are called General Purpose-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 5 terminations over the past year. The pins on this board total to 5 in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 5 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 25μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. There should be no change in the voltage gain at 132dB. This op amp ic has 1 circuits. Op amp ic has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR.
LMV2011MF/NOPB Features
5 Pins
supply voltage of 5V
132dB voltage gain
Output Type: Rail-to-Rail
LMV2011MF/NOPB Applications
There are a lot of Texas Instruments LMV2011MF/NOPB Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Voltage regulation circuit
- Commercial audio systems
- Wireless base stations
- Non-polarized electrodes
- Large motor controllers
- Semiconductor detectors
- Proportional operation circuits
- Portable docking station
- Signal filtering
