LMV301SQ3T2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV301 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 200μA |
| Output Current | 60mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V ±0.9V~2.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 9mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1MHz |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV301SQ3T2G Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. Buffer amplifier has a total of 5 pins. Please take in mind that op amp should be run at 2.7V. Instrumentation amplifier is a part of Operational Amplifiers. 5 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 9mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 200μA can be used to operate this linear amplifier. There should be no change in the voltage gain. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LMV301SQ3T2G Features
5 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV301SQ3T2G Applications
There are a lot of ON Semiconductor LMV301SQ3T2G Instrumentational OP Amps applications.
- Professional videography
- Industrial applications including automation
- Broadcasting
- Multimedia playback equipment
- Navigation
- Precision measurement
- Image computer boards
- Semiconductor detectors
- Video amplifiers
- Automatic control
