LMV321IDCKT
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMV321 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 130μA |
| Nominal Supply Current | 250μA |
| Output Current | 160mA |
| Slew Rate | 1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.7mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
LMV321IDCKT Overview
In order to protect the op amps, a 5-TSSOP, SC-70-5, SOT-353 case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 5 terminations. In this case, there are 5 pins on the board. Please take in mind that this instrumentation amplifier should be run at 2.7V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 5 pins that make up the linear amplifier. There is an input offset voltage of 7mV for this buffer op amp. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. As long as the supply current of the chip does not exceed 130μA, this op amp ic can operate. It is recommended to keep the voltage gain at 100dB at all times. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The instrumentation amplifier is packed in the form of TR.
LMV321IDCKT Features
5 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV321IDCKT Applications
There are a lot of Texas Instruments LMV321IDCKT Instrumentational OP Amps applications.
- Power generator
- Power transmission
- Radiation thermometry transducers
- Portable media players
- Cinema or auditorium audio system
- Video conversion and routing
- Tablets
- Addition operation circuits
- Blood pressure sensors
- Band-stop filter
