Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Number of Pins | 5 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Terminal Finish | Matte Tin (Sn) |
Subcategory | Operational Amplifier |
Packing Method | TAPE AND REEL |
Technology | BICMOS |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | LMV321 |
Pin Count | 5 |
Output Type | Rail-to-Rail |
Number of Channels | 1 |
Operating Supply Current | 162μA |
Nominal Supply Current | 145μA |
Output Current | 46mA |
Slew Rate | 0.45V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 65 dB |
Current - Input Bias | 16nA |
Voltage - Supply, Single/Dual (±) | 2.7V~6V |
Output Current per Channel | 48mA |
Input Offset Voltage (Vos) | 100μV |
Bandwidth | 1.3MHz |
Unity Gain BW-Nom | 1300 kHz |
Voltage Gain | 97dB |
Low-Offset | NO |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 7V |
Low-Bias | NO |
Micropower | YES |
Bias Current-Max (IIB) @25C | 0.063μA |
Programmable Power | NO |
Power | NO |
Max Junction Temperature (Tj) | 150°C |
Height | 1.45mm |
Length | 3mm |
Width | 1.75mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 5. A total of 5 pins are located on this board. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 5 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. It is possible to operate this buffer amplifier from a supply current of 162μA . Voltage gain should remain at 97dB. Buffer op amp is equipped with 1 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The instrumentation amplifier is packed in the form of TAPE AND REEL.
Operating range from VCC = 2.7 to 6 V
Rail-to-rail input and output
Extended Vicm (VDD - 0.2 V to VCC + 0.2 V)
Low supply current (145 μA)
Gain bandwidth product (1 MHz)
ESD tolerance (2 kV)
Battery powered electronic equipment
Personal medical care (glucose meters)
Laptops