LMV321LICT
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMV321 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 130μA |
| Nominal Supply Current | 220μA |
| Output Current | 46mA |
| Slew Rate | 0.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 27nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 43mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.3MHz |
| Unity Gain BW-Nom | 1300 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Current - Output / Channel | 70mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Programmable Power | NO |
| Power | NO |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Height | 1.1mm |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
LMV321LICT Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. There are 5 pins on this chip. Regarding input offset voltage, buffer amplifier rates 1mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. This op amp can operate from a supply current at 130μA. Op amp is a member of the 100dB's 100dB family. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The linear amplifier is packaged by using a TAPE AND REEL axis.
LMV321LICT Features
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMV321LICT Applications
There are a lot of STMicroelectronics LMV321LICT Instrumentational OP Amps applications.
- Medical instruments
- Division circuits
- Laptop
- Fast A/D and D/A converters
- Weighing systems
- Scintillation detectors
- High input resistance broadband
- Measurements of Wheatstone bridge
- Inverse/same-phase proportional circuit
- High speed sample
